REI will also exhibit their other products including OSCOR Green Spectrum Analyzer and TALAN Telephone and Line Analyzer.

Surreptitious electronics are becoming smaller and harder to detect, which can present serious problems for security professionals everywhere. The new
ORION™ 2.4 Non-Linear Junction Detector (NLJD) from REI provides better sensitivity for detecting and
locating smaller more advanced semiconductor circuitry, even when the target device is turned off.

The ORION 2.4 can be used to sweep boardrooms, offices or meeting spaces for unauthorized or hidden recording devices or other hidden electronics. It is also effective for searching prison cells for electronic contraband such as cell phones, chargers, or other
electronic devices. The ORION 2.4 is smaller and lighter than other non-linear junction detectors and
provides superior detection.

The ORION 2.4 can locate small electronics such as SIM cards in walls, floors, ceilings, packaging, fixtures, furniture or containers. A digitally modulated 2.4 GHz transmit signal stimulates non-linear junctions prompting returning harmonic signals at 2 and 3 times the transmit frequency.

The receiver digitally correlates and displays 2nd and 3rd harmonics simultaneously. A stronger 2nd harmonic indicates the target to be electronic and suggests further investigation is warranted. A stronger 3rd harmonic indicates the response may be a naturally occurring junction such as contact between dissimilar metals, corrosion, or rust.

Because the ORION 2.4 is detecting the physical properties of a device and not energy or emissions, the ORION 2.4 will still detect semiconductors, even if the object is turned off or inactive.

In addition to the visual response, the ORION™2.4 also provides selectable audio and haptic (vibration) responses when a potential device is encountered. A trip setting can also be selected to only allow audible or haptic responses beyond the selected threshold. The compact antenna head allows easier access to small areas and is circularly polarized for signal reception regardless of the antenna’s orientation.

The synthesized transceiver provides frequency stability and agility to automatically search for clean operating frequencies between 2.404GHz-2.472GHz. Receiver sensitivity to both 2nd and 3rd harmonics is -140 dBm. Transmit power is 3.3 watts (average EIRP).

Transmit power settings can be adjusted manually or automatically.

Transmit power and both 2nd and 3rd harmonic LED level indicators are located on the antenna head for line of site display so the user can see response activity in line with the target area being swept.

System and operational status (TX Power mode, Frequency mode, Audio options, etc.) is also displayed on the antenna head and controlled via the keypad on the handle.
The body is small enough to operate as a hand held NLJD (weighing less than 3 lbs/1.4 kg) and also has an in-line telescoping handle that extends the unit to an overall length of 58 in/1.5 m for sweeping hard to reach areas. The single body construction of the
ORION™2.4 is water-resistant and requires no assembly.

The unit is powered by a 10.8V Li-Ion rechargeable battery. Typical battery run time is about 8-hours depending on settings. The ORION™2.4 also comes with a new battery recharging station that also, when connected to the unit or a second recharging station, can charge two batteries consecutively.

The completely new design and features of the ORION™2.4, including a higher transmit frequency, increased power, power management, and receiver sensitivity offer significant enhancements in this new generation NLJD. The ORION™2.4 is a critical piece of equipment to own when information security is important.