Altronix will obtain an even greater presence in the Midwestern U.S. with the mergers of long-time manufacturer rep partners PMA Marketing and Legacy Marketing, who together will operate under the Legacy Marketing brand. The combined resources and expertise of Legacy Marketing will further support systems integrators and resellers of Altronix power and transmission solutions across the Great Lakes region including IL, IN, KY, WV, VA, WI, PA, OH, and MI.
Altronix showcased the new eBridge1600F 16-port EoC receiver with integral PoE switch at GSX 2018. Altronix eBridge1600F is an all-in-one, head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit. It features 16 Ethernet ports rated at 100Mbps (full duplex up to 300m without repeaters) with 30W full power per port (500W total power), one 1Gb SFP (fiber port), and two 1Gb Ethernet uplinks.
Altronix has enhanced its industry-leading line of NetWay™ Midspans with the introduction of two high-powered additions here at GSX 2018. The NetWay8GP 8-port Midspan provides up to 60W power per port to power PoE/PoE+/Hi-PoE devices (480W total), and the NetWay16G 16-port Midspan up to 30W power per port for PoE/PoE+ devices (480W total). The NetWay8G and NetWay16G both feature: a 1U rack enclosure; 10/100/1000 Mbps data rates at distances up to 100m; an integral battery charger; and embedded Altronix LINQ™ Technology.
Altronix introduced the latest additions to its popular series of Trove™ Access and Power Integration Solutions at GSX 2018. The new Trove1M1WP outdoor enclosure with backplane allows for easy integration with Altronix power and Mercury/Lenel access controllers. The new Trove Rackmount Series accommodates access controllers from leading manufacturers expanding versatility beyond wall-mount configurations. These new additions simplify board layout and wire management while reducing installation time and labor costs.
Altronix has enhanced the ACMS8 Dual-Voltage Access Power Controller with bi-color output LEDs to visually indicate 12VDC or 24VDC at-a-glance. The unit’s switch-selectable versatility adds greater flexibility when combining 12VDC and 24VDC devices further facilitating ease of installation and adding a new level of protection in the same system. The ACMS8 distributes voltage from two 12VDC and 24VDC power sources simultaneously over any of the unit’s eight (8) individually selectable outputs allowing for a wide range of lock options.
Altronix announced it has added Paxton Access to its expanding portfolio of Trove™ Access and Power Integration Solutions, which simplify board layout and wire management, greatly reducing installation and labor costs. Altronix Trove2PX2 seamlessly accommodates Paxton controllers providing a scalable, cost effective access control solution. The Trove2PX2 includes a removable backplane which accommodates up to 12 Paxton Net2 plus series controllers. This allows installers to test and configure the access system prior to installation.
Altronix announces the release of NetWaySP2P 2-Port Media Converter/Injector, which converts a single fiber cable into two 1Gb Ethernet ports providing PoE/PoE+. This allows multiple IP devices to be deployed at greater distances utilizing fiber – reducing the need for additional cabling, equipment and installation costs. The P1MM is to be used with Multi-Mode Fiber for distances up to 550m and the P1SM10 is to be used with Single-Mode Fiber for distances up to 10Km.
Altronix is showcasing a unique access power controller here at ISC West 2018 which allows you to deploy two locking devices or readers with different power requirements simultaneously. The ACMS8 Dual-Voltage Access Power Controller, stacks together with Altronix’s VR6 Voltage Regulator to distribute 12VDC or 24VDC from a single 24VDC power source over each of the unit’s individually selectable eight outputs, reducing the cost of multiple power supplies at access locations with multiple devices.
Altronix and ZKTeco USA have recently teamed up to deliver a new access control and power integration solution that simplifies board layout and wire management, greatly reducing installation and labor costs. Designed and manufactured to seamlessly integrate with ZKAccess C3 and inBio access control panels, Trove2Z2 provides the versatility and flexibility to easily configure and install access systems.
Altronix announced the release of NetWay™ SP2P 2-Port Media Converter/Injector, which converts a single fiber cable into two 1Gb Ethernet ports providing PoE/PoE+. This allows multiple IP devices to be deployed at greater distances utilizing fiber – reducing the need for additional cabling, equipment and installation costs. The NetWaySP2P provides up to 30W per port in a compact insulated housing. These units can be powered locally or remotely using Altronix WayPoint562, NetWay1D or NetWaySP4 rack series that provide 56VDC.